Millworker Help Printable version
Help / Tools

Project Info

Part Assembly Drawing

The project's details and part numbers in its MatFin workbook, and the iProperties pushed down to every subassembly and part.

Where

One window for the job, in three tabs. The project's details and its part numbers are kept in the project's MatFin workbook (the one Reference Tables and Push to MatFin use), on two sheets of their own beside MATFIN, so everyone on the job sees the same ones. The workbook's path is shown at the top; with no workbook in the project folder, Make the MatFin workbook starts one as a copy of the template (an unsaved drawing finds the workbook through the models it shows).

Project

Project number, Project name, Project manager, Customer, Site address and Project info (notes, several lines). They load from the project's MatFin when Project Info opens; Load from workbook reads it again, or, for a file not saved in its project folder yet (a new assembly), lets you pick the MatFin and loads its PROJECT_INFO into the fields. Save to workbook writes them on the workbook's PROJECT sheet (a field in column A, its value in B). A field you add on that sheet yourself shows here too. The buttons along the bottom work from every tab: Save to workbook keeps the Project tab's fields in the MatFin; Set on this file puts them, and your iProperties list, on the open part, assembly or drawing as custom iProperties (Project Number, Project Name, Project Manager…) for title blocks and parts lists; Push down does the same on the open file and every subassembly and part in it. When the workbook has no value yet, the box starts with the assembly's own iProperty (and the job number for the project number). With I use Vault ticked in Settings, a checked-in workbook has to be checked out first.

One workbook: the PROJECT_INFO and PART NUMBERS tabs are added to the project's MatFin workbook, beside MATFIN; there is never a second file. Make the MatFin workbook shows only when the project folder has none, and makes it as a copy of the template. When Project Info opens a workbook whose PROJECT_INFO tab is missing or empty, the tab is set up there and then with the fields listed, ready to fill in and save (a checked-in workbook: when you save, once it is checked out). PART NUMBERS is added the first time a number is given. The tabs come from MatFinInfoTemplate.xlsx in C:\ProgramData\Autodesk\ApplicationPlugins\Shaw Dev\Templates when it has one: its sheets named PROJECT_INFO (or PROJECT) and PART NUMBERS are copied as they are, title rows, formatting and all; an empty PROJECT_INFO gets FIELD and VALUE headings. A new MatFin workbook starts from the same template (its general notes) when no template workbook is set in Settings, References tab. On the project tab the fields are under a heading FIELD with VALUE beside it; on PART NUMBERS the headings are WORK ORDER, ID, PART NUMBER, PART, ASSEMBLY, DATE and BY, in any order and in the first ten rows (a heading left out is just not filled). Without the template the tabs are made plain.

Part numbers

Every part number given in the project, from the workbook's PART NUMBERS sheet (work order, ID, part number, part, assembly, date, who). The top list has one line per work order: how many numbers it has and the last ID; click one to see its numbers below. Number parts… (in an assembly) opens Part Numbers, which carries on from the work order's last ID and won't give a number that's been given to another part.

iProperties

The iProperties every file in a job should carry (project, customer, room, designer, your own). Type them once on the top assembly and push them down.

  1. Choose the fields in Millworker Settings, Project info tab (or Fields… in the form). Each row is a field: its name in the form, the iProperty it fills, Choices to pick from (separated by ;, blank for a plain box), and whether it goes to Subassemblies and Parts. The iProperty can be one of Inventor's own (Project, Designer, Description, Title, Company …; the box suggests them, and Category shows where it is) or any other name, which is a custom iProperty. ▲/▼ set the order.
  2. Open Project Info, iProperties tab. The fields are shown in that order with the top assembly's values. Tab (or Enter) goes from one to the next; on the last, Enter goes to Push down. Beside each field is its category, and (new) when the assembly doesn't have it yet.
  3. Push down puts the values on the file and on every subassembly and part in it, as each field is set to go (in a drawing: the drawing and the models it shows, and their parts; a part has nothing below it). An iProperty that isn't there is made (in Custom). Blank fields are left alone, unless Push blank fields too is ticked (then they clear the value below). Set on this file writes the open file only.

It's one undo step. Save the assembly to keep the values in the files. Only values that differ are written, so unchanged files aren't touched.

Left out: library, Content Center and iPart/iAssembly member files, and read-only files (checked in to Vault). The read-only ones are named under the fields: check them out and push again.