Help / Reference
Troubleshooting
Common problems and what to send with a support request.
| Problem | What to do |
|---|---|
| No Millworker tab | Open a part or assembly (there is no tab in drawings). Check Tools → Add-Ins: Millworker Loaded and Load Automatically. Millworker needs Inventor 2026 or 2027. |
| A panel can't be marked | The part is locked: check it out of Vault, or it is read-only or a library part. |
| Holes didn't follow a resize | Nodes made with early versions may not be dimensioned to the panel: double-click the node and click OK to remake it. |
| No hardware placed | The fastener nodes were made before hardware tagging: double-click each and OK to tag it. Or use Insert Fastener, which finds holes by their size. |
| Materials missing on another PC | Point every PC's material database to the same shared folder. |
| Tool won't take an icon | The control shows its text alone; it still works. |
Support
Send C:\ProgramData\Autodesk\ApplicationPlugins\Shaw Dev\Data\Millworker\error.log, your Inventor version and the steps to repeat the problem to [support email].