Help / Features
Hinge Holes
Part
Bore concealed (35 mm cup) hinge holes in a door, and the plate holes in the cabinet side.
Set up
- A part with a door and the cabinet side it hangs on, as solid bodies.
- Click Hinge Holes. The sizes popup opens (also on Settings…).
- Click the door's inside face, then its hinge edge, top edge and bottom edge (each an edge or the edge's face). The cups preview as red cylinders.
- With Plate holes ticked on the toolbar (the default), click the side's inside face too. Untick it for the hinge holes only, door by door: it's remembered for next time (the same tick is in Settings, Drill plate holes in the cabinet side).
- Apply, or click the next door's face to carry on, or OK.
Screenshot placeholder
images/hinge-holes-preview.png
1600 × 900 px
Door and cabinet side: door inside face (soft blue), hinge/top/bottom edges (orange) and the side face picked; red cup, hole and plate hole previews.
Screenshot placeholder
images/hinge-holes-popup.png
1000 × 760 px
The Hinge Holes sizes popup: the diagram with A–H and the size boxes, Pantry door middle hinges, the Drill plate holes tick box.
| Size | Default | |
|---|---|---|
| A | Cup diameter | 35 mm (1-3/8″) |
| B | Hinge edge to the cup | 4 mm |
| Cup depth | 13 mm | |
| Screw hole diameter / depth | 8 mm / 10 mm | |
| C | Screw hole spacing | 45 mm centres |
| D | Screw holes in from the cup centre | 9.5 mm |
| E, F | Hinge centre from the top / bottom edge | 100 mm (about 4″) |
| Pantry door: middle hinges | Spaced evenly between top and bottom | |
| G | Plate holes in from the side's front edge | 37 mm |
| H | Plate holes apart | 32 mm (5 mm × 12 mm deep) |
Lengths take units (35mm, 1.5in; the tool unit when none). Every hole is dimensioned to the picked edges, so when the door or side changes size the holes follow, with no Update. Double-click the node to change sizes; Update all hinge holes in this part does every hinge node at once. The cups are tagged for Place Hardware.